Loading Data - YASKAWA DX100 Operator's Manual

DX100

7.3.0.3 Loading Data

7 External Memory Devices
7.3 Operation Flow
To upload data from the external memory device to the memory of the
DX100, follow the procedure in the following.
Data such as PARAMETER, SYSTEM DATA, I/O DATA,
and the batch data such as PARAMETER BATCH, BATCH
CMOS, ALL CMOS AREA, that include PARAMETER,
SYSTEM DATA, I/O DATA, contain the information specific
to each robot controller.
NOTE
Those data are prepared as backup data for reloading into
the controller used for saving.
Loading the data from other controller may result in destruc-
tion or loss of critical system information.
Take extra care for the saved data.
Loading a Job
1. Select {FD/PC CARD} under the main menu.
2. Select {LOAD}.
– The following window appears.
3. Select {JOB}.
– The job selection window appears.
工控帮助教小舒QQ:2823408167
7-28
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/