DX100
9.5
9.5.1 Check Run
9.5.2 Actual Welding
9
Spot Welding Application Using a Motor Gun
9.5
Playback (Motor Gun)
Playback (Motor Gun)
This section explains the check run and the actual welding.
Confirm the taught path in a check run. The check run is a dry run, so
welding instructions such as SVSPOT are not carried out.
1. Set the mode switch to "PLAY" on the programming pendant.
2. Select {UTILITY} under the menu.
3. Select {SETUP SPECIAL RUN}.
4. Select "CHECK-RUN" to set to "VALID."
After having confirmed the taught path, start welding.
To start the SVSPOT instruction, select "CHECK-RUN" on the SPECIAL
PLAY window to set to "INVALID."
工控帮助教小舒QQ:2823408167
9-18
该文档是极速PDF编辑器生成,
如果想去掉该提示,请访问并下载:
http://www.jisupdfeditor.com/