Registering Reserved Start I/O Signal - YASKAWA DX100 Operator's Manual

DX100

4.5.1.2 Registering Reserved Start I/O Signal

4 Playback
4.5 Playback with Reserved Start
Register the start I/O signal as a preparation to perform the start operation
from the station.
This operation can be done only when the operation mode
is the teach mode and the security mode is the manage-
NOTE
ment mode, and only when the setting of "RESERVED
START JOB CHANGE" is "PERMIT" in the OPERATING
CONDITION window.
1. Select {SETUP} under the main menu.
2. Select {RES. START(CNCT)}.
– The RESERVED START (CNCT) window appears.
3. Select "START IN" or "START OUT" for each station.
– The number can now be entered.
4. Input signal number and press [ENTER].
工控帮助教小舒QQ:2823408167
4-26
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/