YASKAWA DX100 Operator's Manual page 229

DX100
6 Convenient Functions
6.2 Parallel Shift Function
PX =
MSHIFT
After the number is input, press [ENTER] to modify the number value
in the input buffer line.
• Changing the coordinate system in which the shift is performed
Move the cursor to the instruction in the input buffer line and press
[SELECT]. The DETAIL EDIT window appears.
MSHIFT
Line up the cursor with "BF" and press [SELECT]. The selection
dialog box appears.
Line up the cursor with the coordinate system to be changed, and
press [SELECT].
After the coordinate system modification is complete, press [ENTER].
The DETAIL EDIT window closes and the JOB CONTENT window
appears.
6. Press [INSERT] and then [ENTER].
– The instruction displayed in the input buffer line is registered.
0003
Line where 0004
MSHIFT is 0005
registered.
工控帮助教小舒QQ:2823408167
6-12
0 BF PX001 PX002
PX000 BF PX001 PX002
MOVJ VJ=10.00
GETS PX001 $PX000
MSHIFT PX000 RF PX001 PX002
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/