Setting Transmission Station No - Fuji Electric ZSVS-2 Instruction Manual

4.3.7 Setting transmission station No.

The station No. for Modbus communication can be set as follows.
Caution on use
• Establish communication program separately, referring to a separate document "Communication
Function."
Setting range
"01 to 31"
(1) Move the cursor to <7. Station No.> using the
key, and press the
The screen switches as shown at right.
(2) Press the
value to be entered.
(3) Change the setting using the
key.
The setting has now been completed.
key.
key again, and the cursor moves to the
key, and press the
Initial value
"01"
- 54 -
ENT ESC
,
ENT ESC
ENT
,
Setting complete
INZ-TN2ZSVS-E