Response Time - Fuji Electric ZSVS-2 Instruction Manual

4.3.8 Response time

Response time by internal operation (moving average) can be set as follows.
Caution on use
• The set time is for guidelines.
• The response time set here does not include gas feed and gas change time.
• In general, the longer the response speed, the slower the response time and less the fluctuation of
reading.
Setting range
"01 to 60 sec"
(1) Move the cursor to <8. Response time> using the
key, and press the
The screen switches as shown at right.
(2) Move the cursor to the component to be set using the
key.
Press the
be entered.
(3) Select a digit using the
using the
Press the
previous screen appears again.
The setting has now been completed.
INZ-TN2ZSVS-E
key.
key, and the cursor moves to the value to
key, and change the value
key.
key, and the data is registered and the
Initial value
"03 sec"
- 55 -
ENT ESC
,
ENT ESC
,
ENT
, ,
Setting complete