Password Setting - Fuji Electric ZSVS-2 Instruction Manual

4.3.10 Password setting

The password for moving from <Parameter Mode> to <Maintenance Mode> can be set as follows.
Caution on setting
• Be sure to record and store your established password just in case you forget it.
Setting range
"0000 to 9999"
(1) Move the cursor to <10. Password Set.> using the
key, and press the
The screen switches as shown at right.
(2) Press the
value to be entered.
(3) Select a digit using the
using the
Press the
previous screen appears again.
The setting has now been completed.
INZ-TN2ZSVS-E
key.
key again, and the cursor moves to the
key, and change the value
key.
key, and the data is registered and the
Initial value
"0000"
- 57 -
ENT ESC
,
ENT ESC
ENT
, ,
Setting complete