Name Of Each Part And Descriptions - Fuji Electric ZSVS-2 Instruction Manual

1.3 Name of each part and descriptions

1.3.1 Name of each part and descriptions
(1) Analyzer unit
(2) Flow checker
(5) Power switch
(4) Rubber foot
(10) Output connector
(11) Communication connector
(1) Handle
(2) Flow checker
(3) Display/operation unit
(4) Rubber foot
(5) Power switch
(6) Purge gas inlet
(7) Exhaust gas port
(8) Sample gas inlet
(9) Calibration gas inlet
(10) Output connector
(11) Communication connector
(12) Grounding terminal
(13) Power supply connector
(14) Fuse
(15) Specification plate
(16) Heat exhaust port
INZ-TN2ZSVS-E
(1) Handle
(15) Specification plate
Name
Used for transportation of main unit.
Checks gas flow.
LCD and various setting keys
Set the power to ON/OFF.
Inlet for purge gas
Connected to exhaust line.
Connected to sampling gas.
Connected to zero/span calibration gas.
Analog output signal connector
Output signal connector for communication
Connected to the ground.
Connect power cable.
Insert a fuse of rated capacity.
Displays serial No., components to be measured, etc.
For changing internal heat.
(3) Display/operation unit
(9) Calibration gas inlet
(8) Sample gas inlet
(7) Exhaust gas port
(6) Purge gas inlet
(16) Heat exhaust port
(12) Grounding terminal
Description
- 7 -
(13) Power supply connector
(14) Fuse