4.3.12 Checking coefficient
Internal operation coefficient of "offset value" and "zero/span correction value" can be checked in this
mode.
Caution on operation
• This mode is for checking the coefficient.
Entry by key operation is not allowed.
(1) Move the cursor to <12. Coeffi-
cient> using the
press the
The screen switches as shown at
right.
(2) Move the cursor to the item to be
checked using the
press the
mode.
(3) The channels
(CH) on the
<Coefficient>
screen can be
scrolled using
the
key.
(4) Press the
screen.
INZ-TN2ZSVS-E
key, and
key.
key, and
key, to enter the
key to return to the previous
ENT
ESC
,
ENT
ESC
,
or
- 59 -
ESC