Key Lock - Fuji Electric ZSVS-2 Instruction Manual

4.2.2 Key lock

The key lock function can be used to prevent improper operation and entry by an unauthorized person.
Setting contents
• ON : Enables key lock.
• OFF : Resets key lock.
Caution on setting
• The following operations can be made even when key lock is set to "ON."
(1) ON/OFF of the
(2) Execution of zero/span calibration
(3) Execution or error cancel
(4) ON/OFF setting of this mode (key lock)
(5) Adjustment of brightness
• Set this mode to "OFF" before making settings other than the above.
(1) Move the cursor to <Key Lock> using the
and press the
The cursor moves to the value to be entered.
(2) Select "ON/OFF" using the
(3) Press the
Then the item selection screen appears again.
The setting has now been completed.
INZ-TN2ZSVS-E
key (switching between the measurement and the standby modes)
key.
key.
key to register the setting.
Initial value
• OFF
key,
- 39 -
ENT ESC
,
ENT
,
Setting complete