Parameter Mode - Fuji Electric ZSVS-2 Instruction Manual

Make the parameter setting, observing the following.
Setting item
• Current Date/Time
• Key Lock
• Output Hold
• Reset Av. Output
• Back Light
• To Maintenance Mode : Enter the password for entering the maintenance mode.
* See "4.3 Maintenance mode" for details of the maintenance mode.
(1) Move the cursor to <Menu Mode> → <7. Parameter
Setting> using the
(2) On the Parameter Mode screen that appears, move the
cursor to the item to be set using the
press the
INZ-TN2ZSVS-E

4.2 Parameter mode

: Set current month, date, hour, and minute.
: Key operations can be disabled.
: The output can be held during calibration in measurement.
: The average value can be reset.
: The back light can be automatically turned off in standby mode.
And also OFF time of the backlight can be set.
key, and press the
key.
key.
key, and then
- 37 -
ENT ESC
,