Table of Contents
Advertisement
Note: A "+" can be entered at the beginning of the line by pressing
To enter a series of digits, use the following keys:
<Numeric keypad> - to enter the number
- moves the cursor from left to right
- moves the cursor from right to left
- deletes everything after the cursor (to the right)
4.6.3.5 Configuring the Report Method (Protocol) to Monitoring Station
Continue below from the previous section or repeat steps 1 to 7 of section 4.6.3.1and then press the
button repeatedly until the PowerMax10-G2 display will read [PSTN RPRT FORMAT]
59.
Press the
The PowerMax10-G2 display will read [PSTN RPRT FORMAT]. Here you select
the reporting format used by the control panel to report events to Monitoring
Stations.
When the PowerMax10-G2 display reads [PSTN RPRT FORMAT], press the
60.
button.
I
OK
The PowerMax10-G2 display will read [ SIA
61.
Press the
1900/1400", "4/2 1800/2300", "Scancom", "SIA text" and "contact ID",
for example, "SIA text".
62.
Press
to confirm the selection.
I
OK
The PowerMax10-G2 display will revert to [PSTN RPRT FORMAT].
63.
Press the
The PowerMax10-G2 display will read [4/2 PULSE RATE]. Here you select the
pulse rate at which data will be sent to Monitoring Stations if any one of the 4/2
formats has been selected in PSTN Report Format.
When the PowerMax10-G2 display reads [4/2 PULSE RATE], press the
64.
button.
I
OK
The PowerMax10-G2 display will read [20 pps
65.
Press the
"20 pps", " 33 pps" and "40 pps", for example, "40 pps ".
66.
Press
to confirm the selection.
I
OK
The PowerMax10-G2 display will revert to [4/2 PULSE RATE].
You can now press the
menu, or press the
4.6.3.6 Configuring the Number of Retry Attempts
Continue below from the previous section or repeat steps 1 to 7 of section 4.6.3.1and then press the
button repeatedly until the PowerMax10-G2 display will read [PSTN RPRT RETRY].
67.
Press the
The PowerMax10-G2 display will read [PSTN RPRT RETRY]. Here you
determine the number of times the communicator will dial the Monitoring
Station's number via PSTN.
When the PowerMax10-G2 display reads [PSTN RPRT RETRY], press the
68.
button.
I
OK
30
button.
or
button repeatedly to select between "SIA", "4/2
button.
or
button repeatedly to select between "10 pps",
button to take you to the "
button to take you to "
button.
and then
].
].
PSTN RPRT RETRY
".
<OK> TO EXIT
.
PSTN RPRT FORMAT
SIA
SIA text
SIA text
PSTN RPRT FORMAT
4/2 PULSE RATE
20 pps
40 pps
40 pps
4/2 PULSE RATE
"
PSTN RPRT RETRY
or
I
OK
or
I
OK
I
OK
or
I
OK
or
I
OK
D-302756
Advertisement
Table of Contents
