Table of Contents
Advertisement
82.
Press the
I
OK
The PowerMax10-G2 display will revert to [AUTO TEST TIME].
83.
Press the
The PowerMax10-G2 display will read [AUTO TEST CYCLE]. Here you
determine the time interval between consecutive telephone line test messages
sent to the Monitoring Station. The control panel performs this at regular
intervals to verify proper communications.
When the PowerMax10-G2 display reads [AUTO TEST CYCLE], press the
84.
button.
I
OK
The PowerMax10-G2 display will read [ test OFF
85.
Press the
" test every 1 d ", " test every 2 d ", " test every 5 d ", " test every 7 d ",
" test every 14 d ", " test every 30 d " and " test every 5 h ", for example,
" test every 5 d ".
86.
Press
to confirm the selection.
I
OK
The PowerMax10-G2 display will revert to [AUTO TEST CYCLE].
87.
Press the
The PowerMax10-G2 display will read [LINE FAIL REPORT].
88.
Press the
I
OK
The PowerMax10-G2 display will read [PSTN]. Here you determine if the PSTN
telephone line disconnection will be reported or not and determine the delay
between detection of line disconnection and the failure reporting. If the telephone
line is disconnected, the event "tel line fail" will be stored in the event log.
89.
When the PowerMax10-G2 display reads [PSTN], press the
The PowerMax10-G2 display will read [ immediately
90.
Press the
" immediately ", " 5 minutes ", " 30 minutes ", " 60 minutes ", " 180 minutes "
and " don't report ", for example, " 60 minutes ".
91.
Press
to confirm the selection.
I
OK
The PowerMax10-G2 display will revert to [PSTN].
92.
Press the
The PowerMax10-G2 display will read [GSM/GPRS]. Here you determine if the
GSM/GPRS line disconnection will be reported or not and determine the delay
between detection of line disconnection and report failure. If the telephone line
is disconnected, the event "GSM line fail" will be stored in the event log.
93.
Press the
I
OK
The PowerMax10-G2 display will read [ don't report
94.
Press the
" 5 minutes ", " 30 minutes ", " 60 minutes ", " 180 minutes " and " don't
report ", for example, " 30 minutes ".
95.
Press
to confirm the selection.
I
OK
The PowerMax10-G2 display will revert to [GSM/GPRS].
96.
Press the
32
button.
button.
or
button repeatedly to select between " test OFF ",
button.
button.
or
button repeatedly to select between
button.
button.
or
button repeatedly to select between " 2 minutes ",
button.
].
button.
I
OK
].
].
I
OK
AUTO TEST TIME
AUTO TEST CYCLE
I
OK
test OFF
or
test every 5 d
I
OK
test every 5 d
AUTO TEST CYCLE
LINE FAIL REPORT
I
OK
PSTN
I
OK
immediately
or
60 minutes
I
OK
60 minutes
PSTN
GSM/GPRS
I
OK
don't report
or
30 minutes
I
OK
30 minutes
GSM/GPRS
D-302756
Advertisement
Table of Contents
