Table of Contents
Advertisement
The PowerMax10-G2 display will read [2nd RPRT METHOD]. Here you define
nd
the 2
priority of method used to report events. If the method defined to report
events in the 1st priority fails, the control panel will attempt to report using the
method defined in the 2nd priority.
When the PowerMax10-G2 display reads [2nd RPRT METHOD], press the
16.
button.
I
OK
The PowerMax10-G2 display will read [disable
17.
Press the
"cellular", "broadband" and "PSTN", for example, "PSTN".
18.
Press
to confirm the selection.
I
OK
The PowerMax10-G2 display will revert to [2nd RPRT METHOD].
19.
Press the
The PowerMax10-G2 display will read [3rd RPRT METHOD]. Here you define
rd
the 3
priority of method used to report events. If the method defined to report
nd
events in the 2
method defined in the 3rd priority.
When the PowerMax10-G2 display reads [3rd RPRT METHOD], press the
20.
button.
I
OK
The PowerMax10-G2 display will read [disable
21.
Press the
"cellular", "broadband" and "PSTN", for example, "PSTN".
22.
Press
to confirm the selection.
I
OK
The PowerMax10-G2 display will revert to [3rd RPRT METHOD].
23.
Press the
The PowerMax10-G2 display will read [DUAL REPORTING]. Here you
determine whether to report events using PSTN and cellular at the same time
instead of waiting for the 1
When the PowerMax10-G2 display reads [DUAL REPORTING], press the
24.
button.
I
OK
The PowerMax10-G2 display will read [disable
25.
Press the
"PSTN & broadbnd" and "PSTN & cellular", for example, "PSTN &
broadbnd".
26.
Press
to confirm the selection.
I
OK
The PowerMax10-G2 display will revert to [DUAL REPORTING].
You can now press the
menu, or press the
4.6.3.3 Configuring Account Numbers to be Reported to the Monitoring Station
Continue below from the previous section or repeat steps 1 to 7 of section 4.6.3.1and then press the
button repeatedly until the PowerMax10-G2 display will read [RCVR 1 ACCOUNT#].
27.
Press the
D-302756
or
button repeatedly to select between "disable",
button.
priority fails, the control panel will attempt to report using the
or
button repeatedly to select between "disable",
button.
st
method to fail before trying the 2
or
button repeatedly to select between "disable",
button to take you to the "
button to take you to "
button.
].
].
nd
method.
].
RCVR 1 ACCOUNT#
".
<OK> TO EXIT
2nd RPRT METHOD
disable
PSTN
PSTN
2nd RPRT METHOD
3rd RPRT METHOD
disable
PSTN
PSTN
3rd RPRT METHOD
DUAL REPORTING
disable
PSTN & broadbnd
PSTN & broadbnd
DUAL REPORTING
"
I
OK
or
I
OK
I
OK
or
I
OK
I
OK
or
I
OK
or
27
Advertisement
Table of Contents
