Table of Contents
Advertisement
The screen will now prompt you to enter your installer code.
Enter your Installer Code.
3.
4.
Click the
or
option.
5.
When the PowerMax10-G2 display reads [DEFINE PANEL], press
The PowerMax10-G2 display will read [01:ENTRY DELAY 1].
When the PowerMax10-G2 display reads [01:ENTRY DELAY 1], click the
6.
or
OPTION].
7.
Press
and make the selection and then press
I
OK
The PowerMax10-G2 display will revert to [29:DISARM OPTION].
You can now press the
"
" or press the
DEFINE PANEL
4.9.5 Configuring the Screen Saver Options
Here you can determine that if no key is pressed during more than 30 seconds the display will read "PowerMax" (to prevent
a possible intruder of knowing the system status). You can determine that normal display will return after pressing the
button followed by entering user code (Refresh by Code) or after pressing any key (Refresh by Key).
If Refresh by Key is selected, the first pressing of any key (except Fire and Emergency) will cause normal display return and
the second press will perform the key function. Regarding the Fire and Emergency keys, the first key press will cause normal
display return and also will perform the Fire/Emergency function.
Options: scrn saver OFF (default), refresh by code, refresh by key.
Note: To comply with EN requirements, "refresh by code" must be selected.
To Configure the Screen Saver Option
1.
Make sure the system is disarmed and then press the
repeatedly until the PowerMax10-G2 display reads "INSTALLER MODE".
2.
When the PowerMax10-G2 display reads [INSTALLER MODE], press
The screen will now prompt you to enter your installer code.
3.
Enter your Installer Code.
4.
Click the
or
option.
5.
When the PowerMax10-G2 display reads [DEFINE PANEL], press
The PowerMax10-G2 display will read [01:ENTRY DELAY 1].
6.
When the PowerMax10-G2 display reads [01:ENTRY DELAY 1], click the
or
SAVER].
7.
Press
and make the selection and then press
I
OK
The PowerMax10-G2 display will revert to [32:SCREEN SAVER].
D-302756
button repeatedly and select the [DEFINE PANEL]
button repeatedly until the display will read [29:DISARM
or
button to program any other menu in
button to take you to "
button repeatedly and select the [DEFINE PANEL]
button repeatedly until the display will read [32:SCREEN
I
OK
to confirm.
I
OK
".
<OK> TO EXIT
button
.
I
OK
I
OK
to confirm.
I
OK
I
OK
ENTER CODE:
CODE
or
DEFINE PANEL
I
OK
01:ENTRY DELAY 1
or
29:DISARM OPTION
I
OK
SELECT OPTION
I
OK
29:DISARM OPTION
READY 00:00
INSTALLER MODE
I
OK
ENTER CODE:
CODE
or
DEFINE PANEL
I
OK
01:ENTRY DELAY 1
or
32:SCREEN SAVER
I
OK
SELECT OPTION
I
OK
32:SCREEN SAVER
51
Advertisement
Table of Contents
