Table of Contents
Advertisement
8.
When the PowerMax10-G2 display reads [REPORT TO PRVT], press
The PowerMax10-G2 display will read [disable report ].
B. To Configure Event Types to be Reported to User
Here you determine which event groups will be reported to private telephone subscribers.
Term
"all"
"all (-op/cl)"
"all (-alerts)"
"alarms"
"alerts"
"op/cl"
"disable report"
Note: "All" means all events including the L. BAT and AC FAIL trouble messages.
Note: All the above options can be reported to private telephone subscribers by SMS. When Voice Report is enabled alarms
and alerts only can be reported.
The following siren signal will be sent to private telephone upon event reporting:
FIRE: ON - ON - ON - pause.... (- - - - - - ......).
BURGLAR: ON continuously (
EMERGENCY/LATCHKEY: 2-tone siren; like an ambulance.
9.
Press the
"disable report", "all", "all (-op/cl)", "all(-alerts)", "alarms",
"alerts" and "op/cl", for example, "all".
10.
Press
to confirm the selection.
I
OK
The PowerMax10-G2 display will revert to [REPORT TO PRVT].
You can now press the
(see the next section), or press the
C. To Configure Event Types to be Reported to User
11.
Press the
The PowerMax10-G2 display will read [ VOICE REPORT ].
12.
When the PowerMax10-G2 display reads [ VOICE REPORT ], press the
button.
The PowerMax10-G2 display will read [1st private tel#].
13.
Press the
I
OK
(including area code, if required) of the private subscriber to which the system will
report the event groups defined in Report To Private.
14.
Press the
I
OK
The PowerMax10-G2 display will revert to [1st private tel#].
15.
Press the
The PowerMax10-G2 display will read [2nd private tel#].
16.
Press the
I
OK
(including area code, if required) of the private subscriber to which the system will
report the event groups defined in Report To Private.
17.
Press the
I
OK
The PowerMax10-G2 display will revert to [2nd private tel#].
18.
Press the
The PowerMax10-G2 display will read [3rd private tel#].
D-302756
Description
All messages
All messages, except open/close
All messages, except alerts
Alarm messages
Alert messages
Open/close
No message will be reported
...)
and
buttons repeatedly to select between
button to take you to the "
button to take you to "
button.
button and enter the first private telephone number
button.
button.
button and enter the second private telephone number
button.
button.
.
I
OK
" menu
VOICE REPORT
".
<OK> TO EXIT
I
OK
I
OK
disable report
or
all
I
OK
all
REPORT TO PRVT
VOICE REPORT
I
OK
1st private tel#
I
OK
ST
1
PRVT TEL. NO
I
OK
1st private tel#
2nd private tel#
I
OK
nd
2
PRVT TEL. NO
I
OK
2nd private tel#
3rd private tel#
35
Advertisement
Table of Contents
