Installing A New License Code - Thermo Scientific LTQ Series Hardware Manual

Preface

Installing a New License Code

xxiv LTQ Series Hardware Manual
8. Send an e-mail message to ThermoMSLicensing@thermofisher.com:
• In the Subject line, type License Request.
• In the body of the e-mail message, paste the license key and type your name,
company name, and phone number.
• If you purchased the Trap-HCD option, locate the bar code on the License
Trap-HCD for Velos Pro card that came with the instrument. In the body of the e-mail
message, type the product key that appears below the bar code.
• If you did not purchase the Trap-HCD option with the instrument, contact your
local Thermo Fisher Scientific Technical Sales representative.
When Thermo Fisher Scientific Customer Support sends you a new license code, see
"Installing a New License Code."
After you receive your new license code, follow this procedure.

To install the HCD license number
1. Open the LTQ License dialog box (see
2. In the License box, paste a copy of the new license number from the e-mail message and
click Set.
3. Click OK when the following message appears:
The new license number has been set.
step 1 through step 4 on
Example license number
page xxiii).
Thermo Scientific