Getting A New License Code - Thermo Scientific LTQ Series Hardware Manual

Getting a New License Code

Thermo Scientific
You can request a license code through e-mail or fax (see
e-mail requests only that you send to a specific Thermo Fisher Scientific e-mail address.
 To get a Trap-HCD license code
1. Choose Start > All Programs > Thermo Foundation > Instrument Configuration to
open the Thermo Foundation™ Instrument Configuration window.
2. Under Available Devices, select the Velos Pro MS icon and click Add.
3. Under Configured Devices, select the Velos Pro MS icon and click Configure to open
the Velos Pro Configuration dialog box.
4. Select License and click Change License to open the LTQ License dialog box.
5. Highlight the license key in the License box.
6. Press CTRL+C to copy the license key to the Windows Clipboard.
7. Click Close.
Note Do not click Reset in the LTQ License dialog box. If you inadvertently click
Reset, you must reopen the LTQ License dialog box to copy a new license key for
step 8.
page xxvi). These instructions cover
Example license key
LTQ Series Hardware Manual
Preface
xxiii