Using The Diagnostic Tools; Running System Evaluation Tools; Figure 89. Diagnostics Dialog Box Showing The System Evaluation Tools Page - Thermo Scientific LTQ Series Hardware Manual

Using the Diagnostic Tools

Running System Evaluation Tools

Thermo Scientific
A subset of the diagnostic tools that are part of the Tune Plus application targets specific
functions of the entire mass spectrometer. In general, these system evaluation tools do not
contain pass or fail criteria nor do they rate the performance. Instead, they provide data that
can be interpreted by a Thermo Fisher Scientific field service engineer. Because the system
evaluations examine complex interactions, the Thermo Fisher Scientific field service engineer
uses the data in conjunction with other tools and tests to form a diagnosis.
 To run the system evaluation tools
1. In the Tune Plus window, choose Diagnostics > Diagnostics to open the Diagnostics
dialog box.
2. Click Tools at the top of the left pane to display the list of diagnostic tools

Figure 89. Diagnostics dialog box showing the system evaluation tools page

3. Click System Evaluation, and then select the check boxes for the evaluation procedures
that you want to run.
For a description of each system evaluation tool, see
4. Click Start.
The evaluation results appear in the Testing area.
6
Using the Diagnostic Tools
(Figure
System Evaluation Tools.
LTQ Series Hardware Manual
Diagnostics
89).
127