RC32012A Evaluation Kit Manual
Appendix A. How to Upgrade the Firmware
Upload Firmware to the RAM
1. Connect to the EVB.
2. Power up the EVB with No EEPROM Present. This ensures the FW is 4.0.2.7017.
3. The GUI will indicate that the FW on the Chip does not match the GUI FW. Press "Close".
4. Open the "Firmware Utility" window.
5. Update the Firmware first, then press "Update RAM to Current FW Only"
R31UH0010EU0102 Rev.1.02
Page 15
Apr 20, 2022