Figure 4-22: Play back waveform by software
How to Clone and Recall a waveform
Push Save button. Select Type in the bottom menu, in the left menu, turn the
M knob to select Clone.
You can clone one or two channel waveforms between two cursors, and save
it as a cloned waveform into the internal memory or a USB memory device.
You can save four cloned waveforms in the instrument internal memory. The
cloned waveform files saved to a USB memory device are saved with the
extension "ota".
If the optional Arbitrary Function Generator is available in your instrument, you
can output the stored waveform from a file in the internal memory or in a USB
memory device; and the waveform between two cursors can be output directly
without save operation.
The signal generator manufactured by our company can be used to read *.ota
files and recall the cloned waveforms.
Clone Wave menu shows as follows:
Menu
Setting
Type
Clone
Mode
Out1
Out2
Out1&Out2
Source
AG Output
Out1
CH1 CH2
CH3 CH4
4.Advanced User Guidebook
Select the clone function.
Source mode.
Select the source.
76
Instruction