Owon XDS4000 Series User Manual page 79

interval between recorded frames in the range of 10 ms - 10 s. The max frame
number reaches 1000, and you can get better analysis effect with playback
and storage function. The storage medium contains two kinds: Internal and
External.
When the storage medium is Internal, Wave Record contains four modes: OFF,
Record, Playback and Storage.
When storage medium is External, Wave Record contains two modes: OFF,
Record.
Record: To record wave according to the interval until it reaches the end frame
set.
Record menu (Internal Storage) shows as follows:
Menu Setting
Record
Mode
Playback
Storage
Record
frame
mode
FrameSet Interval
Refresh
Operate
Note:
Both of the waveforms of Channel 1 and Channel 2 will be recorded. If a
Channel is turned off while recording, the waveform of the channel is invalid in
the playback mode.
Playback: Play back the wave recorded or saved.
Playback menu shows as follows:
Menu Setting
Playback
Mode
FrameSet
Cur frame
Interval
Play mode
4.Advanced User Guidebook
OFF Close wave record function
Set record menu
Set playback menu
Set storage menu
End Turn the M knob to select the number of frames
to record (1 - 1000)
Turn the M knob to select the interval between
recorded frames (10ms - 10s)
ON Refresh wave during recording
OFF Stop refreshing
Play Begin to record
Stop Stop recording
Start
Turn the M knob to select the number of start
frame
frame to playback (1 - 1000)
Turn the M knob to select the number of end
End
frame to playback (1 - 1000)
frame
Turn the M knob to select the number of current
frame to playback (1 - 1000)
Turn the M knob to select the interval between
played back frames (10ms - 10s)
Loop Play back the wave continuously
Instruction
Instruction
73