How To Save And Recall A Waveform - Owon SDS1000 User Manual

How to Save and Recall a Waveform

Push the Utility button, select Function in the right menu, select Save in the left
menu. By selecting Type in the right menu, you can save the waveforms,
configures or screen images.
When the Type is selected as Wave, the menu is shown as the following table:
Function Menu
Function
Type
Source
Object
Next Page
Close All
File Format
Save
Storage
Prev Page
4.Advanced User Guidebook
Setting Description
Save Display the save function menu
Wave Choose the saving type as wave.
CH1
CH2
Choose the waveform to be saved.
CH3
(Choose All to save all the waveforms
CH4
that are turned on. You can save into
the current internal object address, or
Math
into USB storage as a single file.)
FFT
All
The object Wave0 –Wave15 are listed
in the left menu, turn the M knob to
choose the object which the waveform
is saved to or recall from.
Recall or close the waveform stored in
the current object address. When the
ON
show is ON, if the current object
OFF
address has been used, the stored
waveform will be shown, the address
number and relevant information will be
displayed at the top left of the screen; if
the address is empty, it will prompt
"None is saved".
Enter next page
Close all the waveforms stored in the
object address.
BIN
For internal storage, only BIN can be
TXT selected. For external storage, the
format can be BIN, TXT or CSV.
CSV
Save the waveform of the source to the
selected address.
Save to internal storage or USB
storage. When External is selected, the
Internal file name
External waveform file could be open by
waveform analysis software (on the
supplied CD).
Enter previous page
29
is editable. The BIN