Owon XDS4000 Series User Manual page 51

Windows Trigger menu list:
MENU SETTING
Single
Windows
Mode
CH1
CH2
Source
CH3
CH4
Up Level
Threshold
Low Level
Polarity
Condition
Auto
Normal
Single
Mode
Holdoff
Holdoff
4.Advanced User Guidebook
INSTRUCTION
Set vertical channel trigger type as Windows
trigger.
Select CH1 as the trigger source
Select CH2 as the trigger source
Select CH3 as the trigger source
Select CH4 as the trigger source
Adjust the M knob or click
threshold.
Adjust the M knob or click
threshold.
Positive Polarity, the oscilloscope triggers on the
positive Windows pulse.
Negative Polarity, the oscilloscope triggers on the
negative Windows pulse.
Enter: Triggers when the trigger signal enters the
specified trigger level range.
Exit: Triggers when the trigger signal exits the
specified trigger level range.
Time: Specify the hold time of the input signal after
entering the
oscilloscope triggers when the accumulated hold
time is greater than the windows time. Available
range is 30ns-10s, default 100ns.
Acquire waveform even no trigger occurred
Acquire waveform when trigger occurred
When trigger occurs, acquire one waveform then
stop
100 ns - 10 s, adjust M knob or click
time interval before another trigger occur, press
panel button or click
cursor to choose which digit to be set.
45
to set the up level
to set the low level
specified trigger level. The
to set
to move