How To Save And Recall A Waveform - Owon SDS6062 User Manual

5. Advanced User Guidebook

How to Save and Recall a Waveform

Press the Save button, you can save the waveforms and settings in the instrument.
The menu displayed in the screen is shown as Fig.5-34.
The description of the Save Function Menu is shown as the following table:
Function Menu
Type
When the type is Wave, the menu shows as following:
Source
Object & Show
Save
Storage
When the type is Setting, the menu shows as following:
49
Fig.5-34 Waveform Save Menu
Setting
Wave
Setting
Image
Record
CH1
CH2
Math
Object 1~15
ON
Show
OFF
Internal
External
User Manual of Smart Digital Storage Oscilloscope
Description
Choose the saving type (the Record Type
see "How to Record/Playback Waveforms"
on P51)
Choose the waveform to be saved.
Choose the address which the waveform is
saved to or recall from.
Recall or close the waveform stored in the
current object address. When the show is
ON, if the current object address has been
used, the stored waveform will be shown,
the address number
information will be displayed at the top left
of the screen; if the address is empty, "None
is saved" will be displayed.
Save the waveform of the source to the
selected address. You can also press Copy
button to do it. Storage format is vector.
Save to internal storage of USB storage.
When External is selected, save the
waveform according to the current record
length (see "
Record Length Menu
The file will be named according to the
current system time. The waveform file
could be open by OWON waveform
analysis software (on the supplied CD).
and relevant
" on P42).