Type
When the type is Wave, the menu shows as following:
Type
Wave
Source
Objec
Object &
Show
Show
Save
Storage
4.Advanced User Guidebook
Wave
Configure
Image
Record
Clone
Format
(Right menu)
CH1
CH2
CH3
CH4
Math
(or MathFFT)
Wave0 to
t
Wave99
ON
OFF
Close All
Internal
External
66
Choose the saving type.
About the Record type, see "How to
Record/Playback Waveforms" on P72.
About the Clone type, see "How to
Clone and Recall a waveform" on P76.
For internal storage, only BIN can be
selected. For external storage, the
format can be BIN, TXT or CSV.
Check the waveform to be saved. (If
certain
channel
corresponding menu
disabled.)
Choose
the
address
waveform is saved to or recall from.
Recall or close the waveform stored in
the current object address. When the
show is ON, if the current object
address has been used, the stored
waveform will be shown, the address
number and relevant information will be
displayed at the top left of the screen; if
the address is empty, it will prompt
"None is saved".
Close all the waveforms stored in the
object address.
Save the waveform of the source to the
selected address. Whatever the Type
of save menu is set, you can save the
waveform by just pressing the Copy
panel button in any user interface.
Select Type in the bottom menu, in the
right Format menu, you can select the
storage format.
Save to internal storage or USB
storage. When External is selected,
save the waveform according to the
current record length (see "
" on P61); the file name is
Length menu
editable. The BIN waveform file could
be open by waveform analysis software
(on the supplied CD).
is
off,
the
item
will be
which
the
Record