How To Clone And Recall A Waveform - Owon XDS3000 Series User Manual

How to Clone and Recall a waveform

You can clone the waveform of one or both channels between two cursors, and save it
in the internal memory or on a USB memory device. You can save four cloned
waveforms in the instrument internal memory. The waveform files saved to a USB
memory device are saved with the extension "ota".
If the optional Arbitrary Function Generator is available in your instrument, you can
output the stored waveform from a file in the internal memory or in a USB memory
device; and the waveform between two cursors can be output directly without save
operation.
Clone Wave menu shows as follows:
Menu Setting
CH1
CH2
CH1&CH2
Source
(Only for
dual-channel
AG)
a
b
Line
ab
x
Clone
Clone
AG Output
(Generator
(Only for
is available)
dual-channel
AG)
Save
Memory
Output
Save
AG Output
(Only for
dual-channel
AG)
4.Advanced User Guidebook
Clone the waveform of CH1
Clone the waveform of CH2
Clone the waveform of CH1 and CH2
Turn the M knob to move line a.
Turn the M knob to move line b.
Two cursors are linked. Turn the M knob to move the
pair of cursors.
Set the cursors to select the entire screen automatically.
Clone the waveform between two cursors, and output it
through the generator.
If the source is CH1 or CH2, you can select
the output channel of the generator.
Out1
If the source is CH1&CH2, the output
Out2
channel is not selectable. Out1 outputs CH1,
Out2 outputs CH2.
Save the waveform between two cursors
Internal
Select the memory location
USB
(Generator is available and internal memory is selected)
Output the waveform in the selected object on the left
(Generator is available and internal memory is
selected)
For the waveform in the selected object on
the left:
Out1
If the source is CH1 or CH2, you can select
Out2
the output channel of the generator.
If the source is CH1&CH2, the output
channel is not selectable. Out1 outputs CH1,
Out2 outputs CH2.
76
Instruction