Switch to
symbol
keyboard
File Browse
To read a waveform stored in internal storage or USB device:
(1) Push
button. Select Arb in the bottom menu, select Others in the right
menu, and select File Browse.
(2) Select the desired waveform file in internal storage (FLASH) or USB device
(USBDEVICE).
(3) Select Read in the right menu.
Built-in Waveform
There are 46 built-in Arbitrary waveforms.
Steps for selecting the built-in waveform:
(1) Push
button to show the bottom menu of generator.
(2) Select Arb in the bottom menu, select Others in the right menu, and select
Built-in.
(3) Select Common, Math, Window or Others in the right menu. E.g. select
Others to enter the following interface.
(4) Turn the M knob to select the desired waveform (or touch if the LCD is
touchscreen). E.g. select Noise. Select Select to output the noise waveform.
(5)
Push the front panel button
arbitrary waveform setting interface.
5.Use the Arbitrary Function Generator
to directly output DC or quickly switch to the
105
Clear
Switch the case
Confirm