Frame is not met, two red error marks will be displayed in the
corresponding position in the waveform.
⚫ Error Frame, Remote Frame, and Overload Frame will be identified in the
"Data" column in the event table (Data Frame will not be identified).
CAN Decoding menu list:
MENU
SETTING
Bus
CAN
Type
Format
EventTable
Display
Save
EventTable
ASCII Table
How to Operate the Function Menu
The function menu control zone includes 8 function menu buttons: Measure,
Acquire, Utility, Cursor, Autoscale, Save, Display, Help
immediate-execution buttons: Autoset, Run/Stop, Single.
How to Implement Sampling Setup
Push the Acquire button, Acqu Mode, Length and Intrpl is shown in the
bottom menu.
The description of the Acqu Mode menu is shown as follows:
Function Menu
Sample
Acqu
Peak
Mode
Detect
4.Advanced User Guidebook
INSTRUCTION
Set bus type of decoding as CAN.
Binary
Decimal
Set the display format of the bus.
Hex
ASCII
ON
Select "ON" to display the event table.
OFF
If a USB storage device is currently connected to
the instrument, save the event table data in a .csv
(spreadsheet) formatted file on the external USB
storage device.
ON
Select "ON" to display the ASCII table.
OFF
Setting
Description
Normal sampling mode.
Use to capture maximal and minimal
samples. Finding highest and lowest
points over adjacent intervals. It is used
for the detection of the jamming burr and
the possibility of reducing the confusion.
60
and 3