6. Use the Multimeter
Input Terminals
The input terminals are on the back of the oscilloscope, which marked as
.
DMM Menu
Push DMM button on the front panel to enter/exit the multimeter function. The
button backlight will be lighted when the multimeter function is enabled.
The bottom menu of multimeter is as below:
Menu
Setting
Current
Voltage
R
6.Use the Multimeter (Optional)
Figure 6-1 Multimeter Input Terminals
Figure 6-2 Multimeter Button
ACA
Measuring AC current
DCA
Measuring DC current
ACV
Measuring AC voltage
DCV
Measuring DC voltage
Measuring resistance
(Optional)
Description
109
、