How To Use Executive Buttons - Owon XDS4000 Series User Manual

theme.
5. Press Quit to exit the help, or just do other operations.

How to Use Executive Buttons

Executive Buttons include Autoset, Run/Stop, Single, Copy.
Autoset
It's a very useful and quick way to apply a set of pre-set functions to the
incoming signal, and display the best possible viewing waveform of the
signal.
The details of functions applied to the signal when using Autoset are
shown as the following table:
Function Items
Channel
Coupling
Vertical Scale
Vertical Position
Bandwidth
Horizontal Level
Horizontal Sale
Trigger Type
Trigger Source
Trigger Coupling
Trigger Slope
Trigger Level
Trigger Mode
Display Format
Force
Help
Pass/Fail
Inverted
Zoom Mode
Record Length
Waveform Math
or FFT
Waveform
Record
Slow-scan
4.Advanced User Guidebook
Setting
DC
Adjust to the proper division.
Adjust to the proper position.
Full
Middle
Adjust to the proper division
Slope or Video
The previous source before autoseting.
When the previous source has no input signal, the
source will be set to the minimum channel which
has input signal.
When all the channels have no input signal, the
source will be set to CH1.
DC
Rising edge
3/5 of the Vpk-pk
Auto
YT
Stop
Exit
Off
Off
Exit
If greater than 10M, it will be set to 10M
Off
Off
Off
97