Logic Trigger - Owon XDS4000 Series User Manual

Idle Time
Configure
Edge Num
Auto
Normal
Single
Mode Holdoff
Holdoff
Noise Reject
ON

Logic Trigger

Trigger according to logic relation.
In Logic Trigger mode, the trigger setting information is displayed on bottom
right of the screen, for example,
indicates that trigger type is Logic, logic mode is AND, CH1 high level and
trigger level is 0.00mV.
Logic Trigger menu list:
MENU SETTING
Mode Logic
AND
Logic
Mode XNOR
XOR
4.Advanced User Guidebook
Set idle time before the edge counting in Nth Edge
Trigger. Adjust M knob or click
press
move cursor to choose which digit to be set.
Available range is 30ns-10s, default 100ns.
Set the edge number value of "N" in Nth Edge
trigger.
Acquire waveform even no trigger occurred
Acquire waveform when trigger occurred
When trigger occurs, acquire one waveform then
stop
100 ns - 10 s, adjust M knob or click
time interval before another trigger occur, press
cursor to choose which digit to be set.
Turn ON/OFF Noise Reject.
（Range 0.3div to10div）
OFF
INSTRUCTION
Set vertical channel trigger type as Logic trigger.
Set logic mode as AND.
OR Set logic mode as OR.
Set logic mode as XNOR.
Set logic mode as XOR.
panel button or click
panel button or click
48
to set idle time
to
to set
move
,