Table of Contents
Advertisement
trigger until the holdoff time has expired. It provides a chance for user to check the
signal in a short period and helps to check some complex signals, such as AM
waveform etc.
How to Operate the Function Menu
The function menu control zone includes 6 function menu buttons: Utility, Measure,
Cursor, Acquire, Save, Autoscale and 4 immediate-execution buttons: Autoset,
Run/Stop, Single, Copy.
How to Implement Sampling Setup
Press the Acquire button; select Mode or Length to set sampling.
The description of the Mode menu is shown as follows:
Function Menu
Setting
Sample
Peak detect
4、8、16、32、64、
Average
128、256、512
The description of the Length menu is shown as follows:
Function Menu Setting
760
7.6K
Length
76K
760K
7.6M
Change the Mode settings and observe the consequent variation of the wave form
displayed.
5.Advanced User Guidebook
Description
Normal sampling mode.
Use to capture maximal and minimal
samples. Finding highest and lowest points
over adjacent intervals. It is used for the
detection of the jamming burr and the
possibility of reducing the confusion.
It is used to reduce the random and don't-care
noises, with the optional number of averages.
Description
Choose the record length
36
Advertisement
Table of Contents
