How To Operate The Function Menu; How To Implement Sampling Setup - Owon XDS3000 Series User Manual

Identifier
Overload Frame
Error Frame
Data Length code
Data
Cyclic Redundancy Check
Note:
⚫ Use the Trigger Level knob to adjust the thresholds of bus trigger and bus
decoding.
⚫ When the ACK (ACKnowledge Character) of Data Frame or Remote Frame is
not met, two red error marks will be displayed in the corresponding position in
the waveform.
⚫ Error Frame, Remote Frame, and Overload Frame will be identified in the "Data"
column in the event table (Data Frame will not be identified).
CAN Decoding menu list:
MENU SETTING
Bus Type CAN
Format
Display
EventTable
Save
EventTable

How to Operate the Function Menu

The function menu control zone includes 8 function menu buttons: Measure, Acquire,
Utility, Cursor, Autoscale, Save, Display, Help and 3 immediate-execution buttons:
Autoset, Run/Stop, Single.

How to Implement Sampling Setup

Push the Acquire button, Acqu Mode, Length, PERF Mode (only for XDS3000-A
series) and Intrpl is shown in the bottom menu.
4.Advanced User Guidebook
I, ID, or do not display
OF
EF
L, DLC, or do not display
D, Data, or do not display
C, CRC, or do not display
INSTRUCTION
Set bus type of decoding as CAN.
Binary
Decimal
Set the display format of the bus.
Hex
ASCII
ON
Select "ON" to display the event table.
OFF
If a USB storage device is currently connected to the
instrument, save the event table data in a .csv
(spreadsheet) formatted file on the external USB storage
device.
60
Green
Green
Green
Blue
Black
Valid: Purple
Error: Red