Welcome" Tab; Software Update" Tab; Maintenance" Tab - Getinge MAQUET CARDIOHELP Service Manual

| 82 | 5 Service Interfaces | CARDIOHELP System |
n
Special
n Function test
n Base Unit IPC (only for professionals)

5.2.2 "Welcome" Tab

"Welcome" tab
This tab contains general information about the service tool software.
n Software version of the service tool software
n Responsible manufacturer of the software

5.2.3 "Software Update" Tab

"Software update" tab
Any software updates required can be carried out in this tab.
On opening the software package, a check of the installed software takes place at the same time.
Discrepancies are displayed in the "Software update" tab, under "Device".
For further information, refer to ⇨ "Carry Out Software Update", page 85.

5.2.4 "Maintenance" Tab

"Maintenance" tab
Service Manual | 3.3 | EN | 05
Copyright Maquet Cardiopulmonary GmbH