Extension Setting 3 Parameters Group ([Pr. Psl; [Pr. Psl02_Functional Safety - Linear Encoder Resolution Setting - Numerator (**Slim)]; [Pr. Psl03_Functional Safety - Linear Encoder Resolution Setting - Denominator (**Slid)] - Mitsubishi Electric MELSERVO-J5 MR-J5-G User Manual

7.5

Extension setting 3 parameters group ([Pr. PSL_ _

])
[Pr. PSL02_Functional safety - Linear encoder resolution setting -
Numerator (**SLIM)]
Initial value
1000 [μm]
Set the linear encoder resolution with [Pr. PSL02] and [Pr. PSL03 Functional safety - Linear encoder resolution setting -
Denominator].
Set a numerator in [Pr. PSL02].
This functional safety parameter is only enabled when using a linear servo motor.
Be sure to set this parameter to the same value set in [Pr. PL02 Linear encoder resolution setting - Numerator] when
executing position monitoring or speed monitoring for a linear servo motor. If this parameter is set to a non-matching value,
[AL. 537 Parameter setting range error (safety sub-function)] occurs.
[Pr. PSL03_Functional safety - Linear encoder resolution setting -
Denominator (**SLID)]
Initial value
1000 [μm]
Set the linear encoder resolution with [Pr. PSL02 Functional safety - Linear encoder resolution setting - Numerator] and [Pr.
PSL03].
Set a denominator in [Pr. PSL03].
This functional safety parameter is only enabled when using a linear servo motor.
Be sure to set this parameter to the same value set in [Pr. PL03 Linear encoder resolution setting - Denominator] when
executing position monitoring or speed monitoring for a linear servo motor. If this parameter is set to a non-matching value,
[AL. 537 Parameter setting range error (safety sub-function)] occurs.
7 FUNCTIONAL SAFETY PARAMETER DETAILS
208
7.5 Extension setting 3 parameters group ([Pr. PSL_ _ ])
Setting range
1 to 65535
Setting range
1 to 65535
Setting method
Each axis
Setting method
Each axis
Ver.
B2
Ver.
B2