[Pr. Pb16_Notch Shape Selection 2 (Nhq2)] - Mitsubishi Electric MELSERVO-J5 MR-J5-G User Manual

[Pr. PB16_Notch shape selection 2 (NHQ2)]

Initial value
00000000h
Set forms of the machine resonance suppression filter 2.
When [Pr. PA08.0 Gain adjustment mode selection] is set to "5" (quick tuning mode), the setting value of this servo parameter
reflects the adjustment result of quick tuning.
[Pr. PB16.0_Machine resonance suppression filter 2 selection]
Initial value
0h
0: Disabled
1: Enabled
[Pr. PB16.1_Notch depth selection]
Initial value
0h
0: -40 dB
1: -14 dB
2: -8 dB
3: -4 dB
[Pr. PB16.2_Notch width selection]
Initial value
0h
0: α = 2
1: α = 3
2: α = 4
3: α = 5
Setting range
Refer to the relevant detail No.
Setting range
Refer to the text
Setting range
Refer to the text
Setting range
Refer to the text
Setting method
Each axis
Ver.
A0
Ver.
A0
Ver.
A0
1 SERVO PARAMETER DETAILS
1.3 Gain/filter setting servo parameters group ([Pr. PB_ _ ])
Ver.
Refer to the relevant detail No.
1
37