[Pr. Pc16_Function Selection C-3A (*Cop3A)]; [Pr. Pc17_Function Selection C-4 (**Cop4)] - Mitsubishi Electric MELSERVO-J5 MR-J5-G User Manual

[Pr. PC16_Function selection C-3A (*COP3A)]

Initial value
00000000h
[Pr. PC16.4_Servo motor incorrect wiring detection function selection]
Initial value
0h
Set the servo motor incorrect wiring detection function to either enabled or disabled.
0: Servo motor incorrect wiring detection disabled
1: Servo motor incorrect wiring detection enabled
[Pr. PC16.5_Servo motor incorrect wiring detection function execution method
selection]
Initial value
0h
Set the execution method for the servo motor incorrect wiring detection function.
0: Detect servo motor incorrect wiring at initial servo-on after enabling servo motor incorrect wiring detection
1: Detect servo motor incorrect wiring at initial servo-on after cycling the power
When [Pr. PC16.4] is set to "0" (disabled), the servo motor incorrect wiring detection function is not executed regardless of the
setting value in this servo parameter.
When this servo parameter is set to "0" (disabled), servo motor incorrect wiring detection is executed at initial servo-on, and
then after the detection is completed, [Pr. PC16.4] will be set to "0" (disabled).

[Pr. PC17_Function selection C-4 (**COP4)]

Initial value
00000000h
[Pr. PC17.1_Linear encoder multipoint Z-phase input - Function selection]
Initial value
0h
When multiple reference marks exist during the full stroke of the linear encoder, set "1".
0: Disabled
1: Enabled
1 SERVO PARAMETER DETAILS
68
1.4 Extension setting servo parameters group ([Pr. PC_ _ ])
Setting range
Refer to the relevant detail No.
Setting range
Refer to the text
Setting range
Refer to the text
Setting range
Refer to the relevant detail No.
Setting range
Refer to the text
Setting method
Each axis
Ver.
A0
Ver.
A0
Setting method
Each axis
Ver.
A0
Ver.
Refer to the relevant detail No.
Ver.
Refer to the relevant detail No.