I/O Setting Parameters ([Pr. Pd; Extension Setting 2 Parameters ([Pr. Pe - Mitsubishi Electric MELSERVO MR-J4-B-LL Series Instruction Manual

3. PARAMETERS

3.2.4 I/O setting parameters ([Pr. PD_ _ ])

Details of I/O setting parameters ([Pr. PD_ _ ]) are the same as those for MR-J4-_B_ servo amplifier. Refer
to section 5.2.4 of "MR-J4-_B_(-RJ) Servo Amplifier Instruction Manual".

3.2.5 Extension setting 2 parameters ([Pr. PE_ _ ])

Details of Extension setting 2 parameters ([Pr. PE_ _ ]) are the same as those for MR-J4-_B_ servo
amplifier. Refer to section 5.2.5 of "MR-J4-_B_(-RJ) Servo Amplifier Instruction Manual".
3.2.6 Extension setting 3 parameters ([Pr. PF_ _ ])
Details of Extension setting 3 parameters ([Pr. PF_ _ ]) are the same as those for MR-J4-_B_ servo
amplifier. Refer to section 5.2.6 of "MR-J4-_B_(-RJ) Servo Amplifier Instruction Manual" and section 5.2.2 of
"MR-J4-DU_(-RJ)/MR-CR55K_ Instruction Manual".
3.2.7 Linear servo motor/DD motor setting parameters ([Pr. PL_ _ ])
Linear servo motor/DD motor setting parameters ([Pr. PL_ _ ]) are not used with MR-J4-(DU)_B_-LL servo
amplifiers. Do not change from the default.
The default values are the same as those for MR-J4-_B_ servo amplifiers. To check the default values, refer
to section 5.1.7 of "MR-J4-_B_(-RJ) Servo Amplifier Instruction Manual".
3 - 14