Chapter 7: Verifying and Configuring the Switch
120
This example configures ports 33 and 37 for 100Gbps QSFP28
transceivers:
awplus(config)# platform portmode interface
port1.0.33, port1.0.37 100g
This example configures port 25 for a breakout cable:
awplus(config)# platform portmode interface port1.0.25
10gx4
This example configures ports 25 and 29 for 40Gbps QSFP+
transceivers:
awplus(config)# platform portmode interface
port1.0.25,port1.0.29 40g
4. After configuring the ports, go to "Saving Your Changes and
Rebooting the Switch" on page 121.