Figure 35: Removing The Ethernet Line Card From The Anti-Static Bag; Figure 36: Sliding The Ethernet Line Card Into The Slot - Allied Telesis 950 Series Installation Manual

x950 Series Installation Guide for Stand-alone Switches
Figure 35. Removing the Ethernet Line Card from the Anti-static Bag
3. Position the line card with the notch on the faceplate in the bottom left
corner, as shown in Figure 36, and carefully slide it into the slot.
Notch
Figure 36. Sliding the Ethernet Line Card into the Slot
Caution
Do not force the card into the slot. If you feel resistance, remove it
and try again.
77