Figure 94: Aligning The Fan05 Module In The Switch Slot; Figure 95: Seating The Fan05 Module On The Internal Connector - Allied Telesis 950 Series Installation Manual

Figure 94. Aligning the FAN05 Module in the Switch Slot
3. When you feel the module make contact with the internal connector,
gently press on both sides to seat the module on the connector. Refer
to Figure 95.
Figure 95. Seating the FAN05 Module on the Internal Connector
4. Tighten the two screws on the module to secure it to the switch. Refer
to Figure 96.
x950 Series Installation Guide for Stand-alone Switches
149