Table of Contents
Advertisement
Chapter 1: Overview
Console (RS-232)
Port
Switch ID LED
42
Table 16. NET MGMT Port LED
State
Flashing Amber
Off
You use the Console Port to conduct local management sessions with the
switch. Local management sessions require a terminal or PC with a
terminal emulation program, and the management cable that comes with
the switch. The switch does not need an Internet Protocol (IP) address for
local management sessions because they are not conducted over a
network. For instructions, refer to "Starting a Local Management Session"
on page 113.
Note
The first management session of the switch can be either a local
session or a remote session over your network through the NET
MGMT port. For remote management, the switch uses either its
default IP address 192.168.42.42 or an address assigned to it by a
DHCP server. For instructions on remote management sessions,
refer to the Software Reference for x950 Switches, AlliedWare Plus
Operating System.
The Switch ID LED, shown in Figure 14 on page 40, displays a variety of
information. Figure 15 on page 43 shows the states of the LED when the
eco-friendly mode is disabled.
Description
The port is transmitting or receiving data
at 10 or 100 Mbps.
The port has not established a link to a
network device.
Advertisement
Table of Contents
