Figure 3-17 Analog I/O Connector X8; Table 3-23 Analog I/O Connector X8 - Pin Assignment; Table 3-24 Signal Cable 7Core - maxon motor EPOS4 Module 24/1.5 Hardware Reference Manual

Setup
Pin Assignment for Connector Boards & Compact Versions
3.3.4.7
Figure 3-17
X8
Head A
Pin
Table 3-23
Cross-section
Length
Head A
Head B
Table 3-24
3-32
Analog I/O (X8)
Analog I/O connector X8
Prefab
Head B
Cable
Color Pin
1 white 1
2 brown 2
3 green 3
4 yellow 4
5 grey 5
6 pink 6
7 blue 7
Analog I/O connector X8 – Pin assignment
7 x 0.14 mm
3 m
Plug
Contacts
Wire end sleeves 0.14 mm
Signal Cable 7core
Edition: November 2016
© 2016 maxon motor. Subject to change without prior notice.
Signal
AnIN1+ Analog input 1, positive signal
AnIN1− Analog input 1, negative signal
AnIN2+ Analog input 2, positive signal
AnIN2− Analog input 2, negative signal
AnOUT1 Analog output 1
AnOUT2 Analog output 2
GND Ground
Signal Cable 7core (520854)
, grey
2
Molex CLIK-Mate, single row, 7 poles (502578-0700)
Molex CLIK-Mate crimp terminals (502579)
2
Document ID: rel6627
EPOS4 Module/Compact 24/1.5 Hardware Reference
Description
maxon motor control
EPOS4 Positioning Controller