maxon motor EPOS4 Module 50/8 Hardware Reference Manual
  1. Manuals
  2. Brands
  3. maxon motor Manuals
  4. Controller
  5. EPOS4 Module 50/8
  6. Hardware reference manual

maxon motor EPOS4 Module 50/8 Hardware Reference Manual

Positioning controller
Hide thumbs Also See for EPOS4 Module 50/8:
Table of Contents

Advertisement

Quick Links

Download this manual
maxon motor control
Hardware Reference
maxon motor ag Brünigstrasse 220 P.O.Box 263 CH-6072 Sachseln Phone +41 41 666 15 00 Fax +41 41 666 16 50 www.maxonmotor.com
Positioning Controller
P/N 504384
Positioning Controller
P/N 520885
Hardware Reference
Document ID: rel5977
EPOS4 Positioning Controller
Edition February 2016

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EPOS4 Module 50/8 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for maxon motor EPOS4 Module 50/8

Summary of Contents for maxon motor EPOS4 Module 50/8

  • Page 1 Hardware Reference Edition February 2016 Positioning Controller P/N 504384 Positioning Controller P/N 520885 Hardware Reference Document ID: rel5977 maxon motor ag Brünigstrasse 220 P.O.Box 263 CH-6072 Sachseln Phone +41 41 666 15 00 Fax +41 41 666 16 50 www.maxonmotor.com...

  • Page 2: Table Of Contents

    • you must follow the instructions given therein. EPOS4 Module 50/8 and EPOS4 Compact 50/8 positioning controllers are considered as partly completed machinery according to EU Directive 2006/42/EC, Article 2, Clause (g) and are intended to be incorporated into or assembled with other machinery or other partly completed machinery or equipment.
  • Page 3 EC Motors (BLDC, brushless) ........88 maxon motor control EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.
  • Page 4 • • p a g e i n t e n t i o n a l l y l e f t b l a n k • • maxon motor control Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 5: About

    About this Document 1.1.1 Intended Purpose The purpose of the present document is to familiarize you with the EPOS4 Module 50/8 and EPOS4 Use the document Compact 50/8 positioning controllers. It will highlight the tasks for safe and adequate installation and/or to…...

  • Page 6: Table 3-43 Table

    Indicates information particular to possible damage Damage of the equipment. Table 1-2 Symbols and signs maxon motor control Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.
  • Page 7 The present document – including all parts thereof – is protected by copyright. Any use (including repro- duction, translation, microfilming, and other means of electronic data processing) beyond the narrow restrictions of the copyright law without the prior approval of maxon motor ag, is not permitted and sub- ject to prosecution under the applicable law.

  • Page 8: About The Devices

    Thanks to its smart design, the EPOS4 Module 50/8 can either be used in combination with EPOS4 CB Power connector boards as a compact, integrated solution or be incorporated into customer-specific motherboards for single axis or multi axes motion control systems.

  • Page 9: About The Safety Precautions

    – and be kept – in a safe operating mode. • Be aware that you are not entitled to perform any repair on components supplied by maxon motor. Electrostatic sensitive device (ESD) •...
  • Page 10 • • p a g e i n t e n t i o n a l l y l e f t b l a n k • • maxon motor control 1-10 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 11: Specifications

    Digital Hall sensor signals +2.0…+24 VDC (internal pull-up) H1, H2, H3 Continued on next page. maxon motor control 2-11 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.
  • Page 12 Operating altitude in meters above Mean Sea Level, MSL. Table 2-4 Technical data maxon motor control 2-12 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 13: Thermal Data

    40 A — Thermal overload 100 °C 90 °C Table 2-5 Limitations maxon motor control 2-13 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 14: Dimensional Drawings

    EPOS4 Module 50/8 – Dimensional drawing [mm] Figure 2-6 EPOS4 CB Power CAN – Dimensional drawing [mm] maxon motor control 2-14 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.
  • Page 15 Dimensional Drawings Figure 2-7 EPOS4 Compact 50/8 CAN – Dimensional drawing [mm] maxon motor control 2-15 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 16: Standards

    • Module: TBD hours • Compact CAN: TBD hours Table 2-6 Standards maxon motor control 2-16 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 17: Setup

    ERMISSION TO COMMENCE NSTALLATION EPOS4 Module 50/8 and EPOS4 Compact 50/8 positioning controllers are considered as partly com- pleted machinery according to EU Directive 2006/42/EC, Article 2, Clause (g) and are intended to be incorporated into or assembled with other machinery or other partly completed machinery or equipment.

  • Page 18: Pin Assignment For Module Version

    ** Connect all pins in respect to the individual pin current rating. Table 3-7 Pin assignment A1…A32 (X1…X5) maxon motor control 3-18 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.
  • Page 19 CAN ID 2 CAN ID 2 (valence = 2) Continued on next page. maxon motor control 3-19 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 20: Table 3-47 Table

    Table 3-8 Pin assignment B1…B46 (X6…X12) maxon motor control 3-20 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 21: Pin Assignment For Connector Boards & Compact Versions

    Signal Cable 8core 520853 3-32 RS232-COM Cable 520856 3-35 Continued on next page. maxon motor control 3-21 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 22: Table 3-49 Table

    Prefab maxon cables &B AKE YOUR If you decide not to employ maxon motor’s prefab cable assemblies, you might wish to use the prepack- aged kit that contains all connectors required to make up your own cabling. EPOS4 Connector Set (520859)

  • Page 23: Tools

    • The third column describes the pin number of the prefab maxon cable’s Head B. maxon motor control 3-23 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 24: Table 3-55 Table

    Head B Wire end sleeves 2.5 mm Table 3-13 Power Cable High Current maxon motor control 3-24 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 25: Table 3-59 Table

    Molex Mini-Fit Jr. female crimp terminals (45750) Head B Wire end sleeves 0.75 mm Table 3-15 Power Cable maxon motor control 3-25 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 26: Table 3-63 Table

    Motor connector X3A / X3B – Pin assignment for maxon EC motor Continued on next page. maxon motor control 3-26 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.
  • Page 27 Head B Wire end sleeves 2.5 mm Table 3-19 Motor Cable High Current maxon motor control 3-27 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.
  • Page 28 Head B Wire end sleeves 0.14 mm Table 3-21 Hall Sensor Cable maxon motor control 3-28 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.
  • Page 29 DIN 41651 plug, pitch 2.54 mm, 10 poles, with strain relief Table 3-24 Encoder Cable maxon motor control 3-29 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.
  • Page 30 Table 3-25 Sensor connector X6 – Pin assignment Continued on next page. maxon motor control 3-30 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.
  • Page 31 Head B Wire end sleeves 0.14 mm Table 3-26 Sensor Cable 5x2core maxon motor control 3-31 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.
  • Page 32 Head B Wire end sleeves 0.14 mm Table 3-28 Signal Cable 8core maxon motor control 3-32 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.
  • Page 33 Head B Wire end sleeves 0.14 mm Table 3-30 Signal Cable 7core maxon motor control 3-33 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.
  • Page 34 Molex CLIK-Mate, single row, 8 poles (502578-0800) with cable bridges Figure 3-20 STO Idle Connector maxon motor control 3-34 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.
  • Page 35 Female D-Sub connector DIN 41652, 9 poles, with mounting screws Table 3-33 RS232-COM Cable maxon motor control 3-35 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.
  • Page 36 Head B Contacts Molex CLIK-Mate crimp terminals (502579) Table 3-36 CAN-CAN Cable maxon motor control 3-36 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 37: Dip Switch Configuration (Sw1)

    Table 3-37 DIP switch SW1 – Binary code values Continued on next page. maxon motor control 3-37 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.
  • Page 38 (factory setting) Table 3-39 DIP switch SW1 – CAN automatic bit rate detection maxon motor control 3-38 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 39: Spare Parts

    Description number 520860 STO Idle Connector X9 Table 3-42 Spare parts list maxon motor control 3-39 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 40: Connection Specifications

    Continued on next page. maxon motor control 3-40 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 41: Logic Supply

    8 VDC; max. 56 VDC min. 3.5 W Min. output power maxon motor control 3-41 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 42: Motor

    ** Connect all pins in respect to the individual pin current rating. Table 3-46 EC motor – Pin assignment maxon motor control 3-42 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 43: Hall Sensor

    Hall sensor 1 input circuit (analogously valid for Hall sensors 2 & 3) maxon motor control 3-43 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 44: Encoder

    EIA RS422 standard Max. input frequency 6.25 MHz Continued on next page. maxon motor control 3-44 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.
  • Page 45 Encoder input circuit Ch A “single-ended” (analogously valid for Ch B & Ch I) maxon motor control 3-45 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 46: Sensor

    EIA RS422 standard Max. input frequency 6.25 MHz Continued on next page. maxon motor control 3-46 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.
  • Page 47 Digital incremental encoder input circuit Ch A “differential” (analogously valid for Ch B) Figure 3-28 Digital incremental encoder input circuit Ch I maxon motor control 3-47 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.
  • Page 48 Digital incremental encoder input circuit Ch A “single-ended” (analogously valid for Ch B) Continued on next page. maxon motor control 3-48 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.
  • Page 49 Setup Connection Specifications Figure 3-30 Digital incremental encoder input circuit Ch I maxon motor control 3-49 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.
  • Page 50 Analog incremental encoder input circuit Ch A “differential” (analogously valid for Ch B) Continued on next page. maxon motor control 3-50 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.
  • Page 51 Connection Specifications Figure 3-32 Analog incremental encoder input circuit Ch I (digital evaluation) maxon motor control 3-51 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.
  • Page 52 TBD MHz Figure 3-33 SSI absolute encoder data input Continued on next page. maxon motor control 3-52 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.
  • Page 53 Setup Connection Specifications Figure 3-34 SSI absolute encoder clock output maxon motor control 3-53 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 54: Figure 3-44 Figure

    Max. input frequency 6.25 MHz Figure 3-35 HsDigIN1 circuit “differential” (analogously valid for HsDigIN2…4) maxon motor control 3-54 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 55: Figure 3-46 Figure

    Max. input frequency 6.25 MHz Figure 3-36 HsDigIN1 circuit “single-ended” (analogously valid for HsDigIN2…4) maxon motor control 3-55 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 56: Figure 3-48 Figure

    EIA RS422 standard Max. output frequency 6.25 MHz Figure 3-37 HsDigOUT1 output circuit maxon motor control 3-56 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 57: Figure 4-50 Figure

    Switching delay Figure 3-38 DigIN1 circuit (analogously valid for DigIN2…4) – Module maxon motor control 3-57 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.
  • Page 58 DigIN1 circuit (analogously valid for DigIN2…4) – Compact / Logic level setting Continued on next page. maxon motor control 3-58 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.
  • Page 59 DigOUT1 circuit (analogously valid for DigOUT2 and Compact) Continued on next page. maxon motor control 3-59 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 60: Figure 5-61 Figure

    Max. load current Load Figure 3-43 DigOUT1 “source” (analogously valid for DigOUT2 and Compact) maxon motor control 3-60 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.
  • Page 61 Reaction time <25 ms Figure 3-44 STO-IN1 circuit (analogously valid for STO-IN2) maxon motor control 3-61 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.
  • Page 62 Table 3-55 STO logic state maxon motor control 3-62 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 63: Figure 5-73 Figure

    5.64 mV Bandwidth 10 kHz Figure 3-46 AnIN1 circuit (analogously valid for AnIN2) maxon motor control 3-63 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.
  • Page 64 Max. output current limit 1 mA Figure 3-47 AnOUT1 circuit (analogously valid for AnOUT2) maxon motor control 3-64 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 65: Serial Communication Interface (Sci) / Rs232

    Max. bit rate 115’200 bit/s Data format NRZ (non-return-to-zero) Continued on next page. maxon motor control 3-65 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.
  • Page 66 ±9 V @ 3 kΩ to GND Max. bit rate 115’200 bit/s RS232 transceiver EIA RS232 standard maxon motor control 3-66 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 67: Can Interface

    CAN bus.  • For detailed CAN information separate document «EPOS4 Communication Guide». maxon motor control 3-67 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.
  • Page 68 • The CAN ID set by the software is valid if the Node Address is set to “0” (all CAN ID input lines not connected). maxon motor control 3-68 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 69: Serial Peripheral Interface (Spi)

    Serial Peripheral Interface chip select 1 Table 3-62 SPI – Pin assignment maxon motor control 3-69 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 70: Usb (X13)

    Max. bus supply voltage +5.25 VDC Max. DC data input voltage −0.5…+3.8 VDC maxon motor control 3-70 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 71: Status Indicators

    Flash = Flashing (≈0.9 s OFF/≈0.1 s ON) Slow = Slow blinking (≈1 Hz) Table 3-65 Status LED maxon motor control 3-71 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.
  • Page 72 • • p a g e i n t e n t i o n a l l y l e f t b l a n k • • maxon motor control 3-72 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 73: Requirements For Components Of Third-Party Suppliers

    If you are not trained in the design and development of printed circuit boards, you will need additional support for this point. maxon motor will be happy to provide you with a quote for designing and manufacturing a motherboard for your specific application.

  • Page 74: Logic Supply Voltage

    -- - ----------------------------- – 0.3 L   ⋅ ⋅ Phase Motor maxon motor control 4-74 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.
  • Page 75 Wiring of motor winding 1 (analogously valid also for motor windings 2 & 3) maxon motor control 4-75 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 76: Recommended Components And Manufacturers

    100 Ω, 0.25 W Table 4-66 Motherboard Design Guide – Recommended components maxon motor control 4-76 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 77: Design Guidelines

    75 mil and a minimum copper coating thickness of 35 μm are recommended. THT Footprint Figure 4-53 THT footprint [mm] – Top View maxon motor control 4-77 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.
  • Page 78 • • p a g e i n t e n t i o n a l l y l e f t b l a n k • • maxon motor control 4-78 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 79: Contents

    EC Motor – Hall Sensors & Digital Incremental & SSI Encoder* ......5-94 Continued on next page. maxon motor control 5-79 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 80: Contents

    EC Motor – SSI Encoder*............5-100 maxon motor control 5-80 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 81: Dc Motors (Brushed)

    DC Motors (brushed) 5.2.1 DC Motor without Sensor Figure 5-55 DC motor (no sensor) maxon motor control 5-81 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 82: Dc Motor - Digital Incremental Encoder

    DC Motor – Digital Incremental Encoder Figure 5-56 DC motor (digital incremental encoder) maxon motor control 5-82 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 83: Dc Motor - Digital & Digital Incremental Encoder

    DC Motor – Digital & Digital Incremental Encoder* Figure 5-57 DC motor (digital & digital incremental encoder) maxon motor control 5-83 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 84: Dc Motor - Digital & Analog Incremental Encoder

    DC Motor – Digital & Analog Incremental Encoder* Figure 5-58 DC motor (digital & analog incremental encoder) maxon motor control 5-84 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 85: Dc Motor - Digital Incremental & Ssi Encoder

    DC Motor – Digital Incremental & SSI Encoder* Figure 5-59 DC motor (digital incremental & SSI encoder) maxon motor control 5-85 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 86: Dc Motor - Analog Incremental Encoder

    DC Motor – Analog Incremental Encoder* Figure 5-60 DC motor (analog incremental encoder) maxon motor control 5-86 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 87: Dc Motor - Ssi Encoder

    5.2.7 DC Motor – SSI Encoder* Figure 5-61 DC motor (SSI encoder) maxon motor control 5-87 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 88: Ec Motors (Bldc, Brushless)

    5.3.1 EC Motor – Hall Sensors Figure 5-62 EC motor (Hall sensors) maxon motor control 5-88 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 89: Ec Motor - Hall Sensors & Digital Incremental Encoder

    EC Motor – Hall Sensors & Digital Incremental Encoder Figure 5-63 EC motor (Hall sensors & digital incremental encoder) maxon motor control 5-89 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 90: Ec Motor - Hall Sensors & Analog Incremental Encoder

    EC Motor – Hall Sensors & Analog Incremental Encoder* Figure 5-64 EC motor (Hall sensors & analog incremental encoder) maxon motor control 5-90 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 91: Ec Motor - Hall Sensors & Ssi Encoder

    EC Motor – Hall Sensors & SSI Encoder* Figure 5-65 EC motor (Hall sensors & SSI encoder) maxon motor control 5-91 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 92: Ec Motor - Hall Sensors & Digital & Digital Incremental Encoder

    Figure 5-66 EC motor (Hall sensors & digital & digital incremental encoder) maxon motor control 5-92 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 93: Ec Motor - Hall Sensors & Digital & Analog Incremental Encoder

    Figure 5-67 EC motor (Hall sensors & digital & analog incremental encoder) maxon motor control 5-93 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 94: Ec Motor - Hall Sensors & Digital Incremental & Ssi Encoder

    Figure 5-68 EC motor (Hall sensors & digital incremental & SSI encoder) maxon motor control 5-94 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 95: Ec Motor - Digital Incremental Encoder

    EC Motor – Digital Incremental Encoder* Figure 5-69 EC motor (digital incremental encoder) maxon motor control 5-95 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 96: Ec Motor - Digital & Digital Incremental Encoder

    EC Motor – Digital & Digital Incremental Encoder* Figure 5-70 EC motor (digital & digital incremental encoder) maxon motor control 5-96 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 97: 5.3.10 Ec Motor - Digital & Analog Incremental Encoder

    5.3.10 EC Motor – Digital & Analog Incremental Encoder* Figure 5-71 EC motor (digital & analog incremental encoder) maxon motor control 5-97 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 98: Ec Motor - Digital Incremental & Ssi Encoder

    EC Motor – Digital Incremental & SSI Encoder* Figure 5-72 EC motor (digital & SSI encoder) maxon motor control 5-98 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.

  • Page 99: 5.3.12 Ec Motor - Analog Incremental Encoder

    5.3.12 EC Motor – Analog Incremental Encoder* Figure 5-73 EC motor (analog incremental encoder) maxon motor control 5-99 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.

  • Page 100: 5.3.13 Ec Motor - Ssi Encoder

    5.3.13 EC Motor – SSI Encoder* Figure 5-74 EC motor (SSI encoder) maxon motor control 5-100 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.
  • Page 101 EPOS4 Module 50/8 – Dimensional drawing [mm]........
  • Page 102 EC motor (SSI encoder) ..............100 maxon motor control Z-102 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.
  • Page 103 Spare parts list ............... .39 maxon motor control Z-103 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.
  • Page 104 Motherboard Design Guide – Grounding ........... . 77 maxon motor control Z-104 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.
  • Page 105 X10 35 STO 61 X11 36 X12 36 X13 70 country-specific regulations 9 maxon motor control Z-105 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.
  • Page 106 9 prerequisites prior installation 17 prohibitive signs 6 protective measures (ESD) 9 maxon motor control Z-106 Document ID: rel5977 EPOS4 Positioning Controller Edition: February 2016 EPOS4 Module/Compact 50/8 Hardware Reference © 2016 maxon motor. Subject to change without prior notice.
  • Page 107 • • p a g e i n t e n t i o n a l l y l e f t b l a n k • • maxon motor control Z-107 EPOS4 Positioning Controller Document ID: rel5977 EPOS4 Module/Compact 50/8 Hardware Reference Edition: February 2016 © 2016 maxon motor. Subject to change without prior notice.
  • Page 108 The present document – including all parts thereof – is protected by copyright. Any use (including reproduction, translation, microfilming, and other means of electronic data processing) beyond the narrow restrictions of the copyright law without the prior approval of maxon motor ag, is not permitted and subject to prosecution under the applicable law. maxon motor ag Brünigstrasse 220...

This manual is also suitable for:

Epos4 compact 50/8504384520885

Table of Contents