Brakes - BRP can-am RENEGADE 500 2015 Operator's Manual

MAINTENANCE PROCEDURES
SUSPENSION GREASE
BRP
recommended
product
Rear Suspension Lubrication
Lubricate rear sway bar links and pivot
bushing at grease fittings.
SUSPENSION GREASE
BRP
recommended
product
Suspension Inspection
Shock Absorbers
Inspect shock absorber for oil leaks or
other damage.
Check tightness of fasteners.
See an authorized Can-Am dealer as
necessary.
Ball Joints
Inspect ball joints boot for cracks.
WARNING
The ball joint must be replaced if
the boot is cracked. See an autho-
rized Can-Am dealer.
Front A-Arms
Check A-arms for cracks, bending or
other damage.
See an authorized Can-Am dealer as
necessary.
Rear Trailing Arms
Check trailing arms for distortion,
cracks or bending.
See an authorized Can-Am dealer if any
problem is detected.
______________
118
SUSPENSION
GREASE
(P/N 293 550 033)
SUSPENSION
GREASE
(P/N 293 550 033)

Brakes

Brake Fluid Reservoir Level
Verification
With vehicle on a level surface, check
brake fluid in reservoirs for proper
level.
NOTE: A low level may indicate leaks
or worn brake pads.
Front Brake Reservoir Level
Verification
Turn steering in the straight-ahead po-
sition to ensure reservoir is level.
Check the brake fluid level, the reser-
voir is full when the fluid reaches of the
top of window.
Visually inspect lever boot condition.
Check for cracks, tears, etc. Replace if
damaged.
vmo2012-014-022_a
TYPICAL
Rear Brake Reservoir Level
Verification
Remove the seat.
With vehicle on a level surface, liquid
should be between MIN. and MAX.
level marks of brake pedal fluid reser-
voir.