Brakes - BRP Can-am MAVERICK Trail T Series Operator's Manual

MAINTENANCE PROCEDURES
TIGHTENING TORQUE
M12 bolt
NOTE: The suspension arms must be
tightened on the M12 bolt head and not
on the nut (when possible) to insure op-
timal clamping.
219002130-002
Rear Suspension Arms
Check suspension arms for distortion,
cracks or bending.
Tighten at ride height to specifications.
TIGHTENING TORQUE
M12 bolt
Hexagonal
flanged elastic
nut M10
NOTE: The suspension arms must be
tightened on the M12 bolt head and not
on the nut (when possible) to insure op-
timal clamping.
______________
128
112 N•m ± 7.5 N•m
(83 lbf•ft ± 6 lbf•ft)
130 N•m ± 10 N•m
(96 lbf•ft ± 7 lbf•ft)
90 N•m ± 10 N•m
(66 lbf•ft ± 7 lbf•ft)
219002126-019
1. M12 bolt
2. Hexagonal flanged elastic nut M10

Brakes

Brake Fluid Reservoir Level
Verification
The brake fluid reservoirs are located
under the front service cover. Refer to
ACCESSING MAINTENANCE COM-
PONENTS
219001880-055_a
1. Front service cover
With vehicle on a level surface, check
brake fluid in reservoir for proper level.
Brake fluid level should be between
MIN. and MAX. marks.