Drive Shaft Boot And Protector - BRP Can-am MAVERICK Trail T Series Operator's Manual

MAINTENANCE PROCEDURES
2. Remove the light bulb socket.
3. Replace the light bulb.
4. Reinstall the bulb socket and other
removed parts in the reverse order.
Front Position Light Replacement
NOTE: The front position lights cannot
be disassembled. They have to be re-
placed as a whole.
1. Disconnect the electrical connector.
2. Unscrew the retaining nut.
3. Remove the position light.
219002007-022_a
1. Position light electrical connector
2. Retaining nut
4. Install the new position light in the
reverse order.
Licence Plate Bulb Replacement
1. Remove the licence plate bulb
cover.
219002007-023_a
1. Licence plate bulb cover
2. Retaining screw
2. Replace the bulb.
______________
124
3. Reinstall the cover.
Drive Shaft Boot and
Protector

Drive Shaft Boot and Protector

Inspection
Visually inspect drive shaft protectors
and boots condition.
Check protectors for damage or rub-
bing against shafts.
Check boots for cracks, tears, leaking
grease, etc.
Repair or replace damaged parts as
necessary.
219001880-049_a
TYPICAL - FRONT OF VEHICLE
1. Inner drive shaft boots
219001880-050_a
TYPICAL - FRONT OF VEHICLE
1. Outer drive shaft boot