MAINTENANCE PROCEDURES
tmo2011-001-116_a
1. Tail light
2. Light bulb and socket
Push the bulb in and hold while turning
counterclockwise to release.
Installation is the reverse of the re-
moval procedure.
Position Lights Bulbs Replacement
Pull bulb out.
Installation is the reverse of removal.
Drive Shaft Boot and
Protector
Drive Shaft Boot and Protector
Inspection
Visually inspect drive shaft protectors
and boots conditions.
Check protectors for damage or rub-
bing against shafts.
Check boots for cracks, tears, leaking
grease, etc.
Repair or replace damaged parts as
necessary.
______________
112
tmo2011-001-129_a
FRONT OF VEHICLE
1. Radiator
2. Inner drive shaft boots
tmo2011-001-130_a
FRONT OF VEHICLE
1. Outer drive shaft boot
tmo2011-001-128_a
REAR OF VEHICLE
1. Inner drive shaft boot