Setting The Screen Lockout Time - Enterasys SmartSwitch 6000 User Manual

4.2.6

Setting the Screen Lockout Time

The screen lockout time can be set from 1 to 30 minutes with a default of 15 minutes. To set a new
lockout time, perform the following steps:
1. Use the arrow keys to highlight the Screen Lockout Time field.
2. Enter a number from 1 to 30.
3. Press ENTER to set the lockout time in the input field.
4. Use the arrow keys to highlight the SAVE command at the bottom of the screen and press
ENTER.
If the time entered is within the 1 to 30 minutes range, the Event Message Line at the top of the
screen displays "SAVED OK". If the entry is not valid, Local Management does not alter the
current setting, but it does refresh the Screen Lockout Time field with the previous value, and the
valid range will be displayed.
Chassis Configuration Screen
Chassis Menu Screens 4-9